WiLD-SB18
Compact self-powered 8-inch subwoofer that receives audio wirelessly from a WiLD-TX transmitter, with a wired line input as an alternative. Intended for retail, hospitality, education and similar installations needing discreet, cable-free bass.
- Self-powered 8" subwoofer, 100 W RMS / 150 W peak
- Wireless receiver for WiLD-TX, up to 150 m line of sight
- Uncompressed 16 bit / 48 kHz audio, latency under 26 ms
- Low-pass filter 40–250 Hz or full range
- Stereo unbalanced line input on 3-pin Euroblock
- Floor or wall mounting, brackets included
Fotky
5Inzeráty
Tento model zatím nikdo neinzeruje
Až někdo bude prodávat WiLD-SB18, inzeráty a historie prodejů se objeví tady.
Prodat stejnýPopis
The WiLD-SB18 is a self-powered subwoofer with an 8" woofer in a bass-reflex MDF cabinet and a built-in amplifier rated at 100 W RMS / 150 W peak. It works as a receiver in the WiLD wireless system and is paired to a WiLD-TX transmitter, which can be up to 150 m away with direct line of sight. Audio is carried uncompressed at 16 bit / 48 kHz in the 1880–1930 MHz DECT band, with latency under 26 ms.
The rear panel holds a pairing button, a status LED, source selection, a low-pass filter selector (40 Hz to 250 Hz, or full range), auto-standby timing (20 min, 1 h, 4 h or always on) and the master volume. The internal universal power supply accepts 100–240 V AC, and standby consumption is below 2 W.
Besides the wireless input, there is a stereo unbalanced line input on a 3-pin Euroblock connector. The cabinet can stand on the floor or be hung on a wall using the supplied metal brackets, and it is finished in black (RAL 9005).
Video
Specifikace
- Značka
- Ecler
- Model
- WiLD-SB18
- Kategorie
- Živý zvuk › Ostatní pro živý zvuk
Wireless audio (WiS)
- Frequency band
- 1880 - 1930 MHz, EU DECT, US DECT
- Coverage range
- Up to 150 m from a TX to any paired RX, direct line of sight
- Audio channels
- 1 stereo audio ch received from the WiLD-TX network
- Audio transmission
- 16 bit uncompressed, 48 kHz SR
- Frequency response (digital audio)
- 10 Hz – 15 kHz (-1 dB)
- ADC resolution / dynamic range
- 24 bits / 96 dB
- Latency
- From TX Analog Audio IN to RX Speaker <26 ms
- Pairing time
- Up to 60 s
Acoustics
- Effective frequency range
- 57 Hz - 693 Hz (-10 dB)
- Sensitivity
- 92 dB (1W/1m)
- Maximum SPL
- 112 dB continuous / 118 dB peak
- Ways
- 1-way full range
- Driver
- 8" woofer
- Nominal impedance
- 4 Ω
Amplifier and audio
- Power
- 100 W RMS / 150 W peak
- THD + Noise
- <1% @ 1 Hz full power
- Signal to noise ratio
- >110 dB @ 100 W RMS
Inputs
- Audio inputs
- Wireless Audio: Digital, Mono; Line in: ST unbalanced 3-pin Euroblock
- Input sensitivity (wireless)
- -8 dBV / 10 kΩ
- Input sensitivity (line in)
- -15 dBV / 10 kΩ
Outputs
- Audio outputs
- Internal loudspeaker: Analog, Mono, Self powered
Controls
- Volume control
- LED display, +/- volume buttons
- Other controls
- PAIR via WiLD button; LP Filter and StandBy via volume buttons
- Low pass filter
- 40, 60, 80, 100, 120, 150, 200, 250 Hz, Full Range
- Auto standby time
- 20 min, 1 H, 4 H, On
- Auto standby threshold
- >50 dB
Power
- Power supply
- Universal, internal power supply
- AC mains requirement
- 100-240 VAC @ 50-60 Hz
- AC mains connector
- Standard 2-pin AC plug
- Power consumption
- 150 W
- Power consumption standby
- <2 W
- Ventilation
- Convection cooled
Physical
- Installation options
- Floor, wall-mount brackets
- Enclosure material
- MDF
- Finished colour
- Black (RAL 9005)
- Dimensions (W x H x D)
- 450 x 193 x 360 mm / 17.72 x 7.60 x 14.17 in.
- Weight
- 9.1 kg / 20.06 lb
- Operating temperature
- -10°C to 40°C / 14°F to 104°F
- Operating humidity
- <85% HR
- Shipping dimensions (W x H x D)
- 550 x 382 x 460 mm / 21.65 x 15.04 x 18.11 in.
- Shipping weight
- 11.5 kg / 25.35 lb
In the box
- Included accessories
- 1x EU AC voltage cord (3x1-1,5m), 1 UK AC voltage cord (3x1-1,5m), 4x wall screws, 4x wall plugs, 2x Wall-mount brackets, 12x screws
- Pieces per box
- 1 unit