2M Bronze Verso
A moving-magnet phono cartridge from Ortofon's 2M series, built for bottom-mount headshells. It uses a Nude Fine Line diamond stylus and suits turntable owners who want a step up in detail and balance.
- Moving-magnet cartridge for bottom-mount headshells
- Nude Fine Line diamond stylus, r/R 8/40 µm
- Split pole pins with silver-plated OFC coil wire
- 5 mV output at 1 kHz, 5 cm/sec
- Recommended tracking force 1.5 g
- Load: 47 kOhm, 150-300 pF
Fotky
5Inzeráty
Tento model zatím nikdo neinzeruje
Až někdo bude prodávat 2M Bronze Verso, inzeráty a historie prodejů se objeví tady.
Prodat stejnýPopis
The 2M Bronze Verso is the bottom-mount version of the 2M Bronze moving-magnet cartridge. It is meant for turntables whose headshell takes the cartridge from underneath, and it uses a half inch bottom mount.
The stylus is a Nude Fine Line diamond with an r/R 8/40 µm tip and an aluminium cantilever. The generator uses quad coils with split pole pins, an Ortofon design, wound with silver-plated OFC wire. The body is polymer and aluminum in black and bronze, and the cartridge weighs 7.2 g. The recommended tracking force is 1.5 g, within a 1.4-1.7 g range.
For electrical matching, the cartridge is specified for a 47 kOhm load resistance and 150-300 pF load capacitance. Output is 5 mV at 1 kHz. The Verso is one of four 2M variants, alongside the standard 2M, the Premounted and the 2MR. A replacement guide covers swapping the M2.0 mm screws, and a user guide and dimensions chart are available for download.
Video
Specifikace
- Značka
- Ortofon
- Model
- 2M Bronze Verso
- Kategorie
- DJ vybavení › Přenosky a hroty
Electrical
- Output voltage at 1 kHz, 5cm/sec
- 5 mV
- Channel balance at 1 kHz
- 1 dB
- Channel separation at 1 kHz
- 26 dB
- Frequency response 20 Hz - 20 kHz
- 2 / - 0 dB
- Internal impedance, DC resistance
- 1.2 kOhm
- Internal inductance
- 630 mH
- Recommended load resistance
- 47 kOhm
- Recommended load capacitance
- 150-300 pF
Stylus and Tracking
- Stylus type
- Nude Fine Line
- Stylus tip radius
- r/R 8/40 µm
- Cantilever material
- Aluminium
- Tracking ability at 315 Hz
- 80 µm
- Compliance, dynamic, lateral
- 22 µm/mN
- Tracking force range
- 1.4-1.7 g (14-17 mN)
- Tracking force, recommended
- 1.5 g (15 mN)
- Tracking angle
- 20°
Construction
- Coil system
- Quad-coils with split pole pins and silver-plated OFC Coil Wire
- Coil wire material
- Silver-plated OFC Coil Wire
- Cartridge body material
- Polymer and aluminum
- Cartridge colour
- Black/Bronze
Physical
- Mounting type
- Half inch bottom mount
- Cartridge weight
- 7.2 g
- Premounted cartridge weight
- 16.7 g