2M Mono Verso
Ortofon Už se neprodává

2M Mono Verso

A mono phono cartridge for playing mono microgroove LP records, built for bottom-mount headshells. It carries a nude spherical diamond stylus and suits vinyl listeners with mono pressings.

  • Mono cartridge for mono microgroove LP records
  • Bottom-mount (Verso) configuration for headshells
  • Nude spherical stylus, R18 µm, aluminium cantilever
  • Strapped output works with any stereo phono stage
  • 4 mV output at 1 kHz, 5 cm/s
  • Tracking force 1.6-2.0 g, 1.8 g recommended

Fotky

5

Inzeráty

Tento model zatím nikdo neinzeruje

Až někdo bude prodávat 2M Mono Verso, inzeráty a historie prodejů se objeví tady.

Prodat stejný

Popis

The 2M Mono Verso is a moving magnet cartridge intended for mono microgroove LP records. This Verso version is configured for bottom-mount headshells, for turntables where the cartridge is fixed from underneath the headshell rather than on top.

It uses a nude spherical diamond stylus with an 18 µm tip radius on an aluminium cantilever. The strapped output sends the same signal from both sets of pole pins, so it can be used with a stereo phono stage and does not need mono-specific equipment. Output is 4 mV at 1 kHz, with a recommended tracking force of 1.8 g.

The body is made of polymer and aluminium in black and white. The cartridge weighs 7.2 g, and 16.7 g when premounted. Electrical loading is recommended at 47 kOhm and 150-300 pF. A replacement guide for the M2.0 mm top-plate screws is provided for the Verso mounting.

Specifikace

Značka
Ortofon
Model
2M Mono Verso
Kategorie
DJ vybavení › Přenosky a hroty

Electrical

Output voltage at 1 kHz, 5 cm/sec
4 mV
Frequency response 20 Hz - 20 kHz
3 / - 1 dB
Internal impedance, DC resistance
700 Ohm
Internal inductance
350 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
150-300 pF

Stylus

Stylus type
Nude Spherical
Stylus tip radius
R18 µm
Cantilever material
Aluminium

Tracking

Tracking ability at 315 Hz
70 µm
Compliance, dynamic, lateral
18 µm/mN
Tracking force range
1.6-2.0 g (16-20 mN)
Tracking force, recommended
1.8 g (18 mN)
Tracking angle
20°

Physical

Cartridge body material
Polymer and aluminum
Cartridge colour
Black/White
Cartridge weight
7.2 g
Premounted cartridge weight
16.7 g
Mounting type
Half inch bottom mount

Dokumenty

PDF Návod k použitíPDF · od výrobce

Data: ortofon.com; fotografie: Ortofon product page · aktualizováno 2026-10-09 · Vidíš chybu? Napiš nám