PMC6
Active two-way nearfield reference monitor with a 6-inch bass driver, 1-inch soft-dome tweeter and ATL bass loading, powered by two 200W Class-D amplifiers. Aimed at professionals in compact control rooms and immersive multi-speaker setups.
- Active 2-way nearfield monitor with ATL bass loading
- 150mm (6") LF driver and 27mm (1") soft-dome tweeter
- Two 200W Class-D amplifiers, one per driver
- Switchable analogue / AES3 digital XLR input
- Automatic portrait/landscape DSP correction
- PMC8 SUB adds XBD mode with bass down to 25Hz
Fotky
8Inzeráty
Tento model zatím nikdo neinzeruje
Až někdo bude prodávat PMC6, inzeráty a historie prodejů se objeví tady.
Prodat stejnýPopis
The PMC6 is a compact active studio monitor built around a 150mm (6") bass driver with 20mm of excursion and a 27mm (1") fabric soft-dome tweeter on a shallow waveguide. The bass driver works with ATL bass loading and Laminair airflow technology, and the tweeter is chosen for wide, consistent dispersion. Each driver has its own 200W Class-D amplifier.
A DSP engine handles the crossover, driver protection, EQ, delay and polarity. It also corrects automatically for portrait or landscape placement. Controls include level trim, a high-pass filter, LF and HF shelving filters, five-band parametric EQ and user presets. Settings can be made from the rear panel or through the SoundAlign browser interface. A ceiling-mount yoke allows suspension in multichannel or immersive systems.
The XLR input switches between analogue and AES3 digital, with a digital AES3 through output and an RJ45 network port for SoundAlign. An expansion card slot is provided for future connectivity upgrades. Adding a PMC8 SUB and switching on the XBD DSP mode creates the PMC6 XBD system, with low-frequency extension down to 25Hz.
Video
Specifikace
- Značka
- PMC
- Model
- PMC6
- Kategorie
- Studio › Studiové monitory
Audio
- Type
- Active 2-way nearfield reference monitor with ATL bass loading
- LF driver
- PMC 150mm (6") studio 6 driver
- HF driver
- PMC 27mm (1") soft dome tweeter
- Effective ATL length
- 1.8m (5.9ft)
- Frequency response
- 39Hz - 25kHz (-3dB) (@1m full space, on-axis)
- Sensitivity
- +4dBu input signal = 98dB SPL @ 1m
- Max continuous SPL
- 106dB @1m
- Max peak SPL
- 118dB @1m
- Directivity
- H +/-60 degrees, V +50/-40 degrees (-6dB off axis @10kHz)
- Latency
- 2.4mS
Inputs
- Input
- XLR switchable between analogue & digital AES3
- Analogue max input level
- +20/+24dBu (selectable)
- Analogue input impedance
- 22K ohm
- Digital input
- 16/24-bit AES3 signal, left, right or left + right
- Digital sample rate
- 18 - 192kHz
- Digital input impedance
- 110 ohm
- Expansion card slot
- For future connectivity upgrades
Outputs
- Output
- XLR digital AES3 (fixed 24-bit @ 96kHz)
Connectivity
- Network
- RJ45 for use with PMC SoundAlign web interface
DSP and controls
- Level trim
- +/-10dB
- Orientation
- Portrait, landscape, auto
- High-pass filter
- 20 - 200Hz, 12dB/Oct
- Delay
- 0 - 30mS
- Phase
- Normal or inverted
- LF & HF shelving filters
- 20Hz - 20kHz, +/- 10dB, Q 0.707
- Parametric EQ
- 5 bands, 20Hz - 20kHz, +/- 10dB
- User presets
- 3 + factory defaults
Power
- Amplifier power, LF
- 1 x 200Wrms
- Amplifier power, HF
- 1 x 200Wrms
- Mains
- 100 - 240VAC auto-switching, 50-60Hz (IEC C14)
- Power consumption (idle)
- 35W
- Power consumption (max)
- 400W
Physical
- Dimensions, portrait (H x W x D)
- 400mm (15.7") x 215mm (8.5") x 372mm (14.6")
- Dimensions, landscape (H x W x D)
- 215mm (8.5") x 400mm (15.7") x 372mm (14.6")
- Weight
- 11.1kg (24.4lbs) each