StageBug SB-15
Radial Engineering Už se neprodává

StageBug SB-15

The StageBug SB-15 is a discrete class-A signal buffer for the start of a guitar signal chain, intended to drive several pedals and a long cable run to the amp. It can also convert two 9V supplies into a 15V output for 15V pedals. The model is discontinued.

  • 100% discrete class-A signal buffer
  • Drag control for load correction
  • Drives pedal chains up to 15 m (50 ft)
  • Converts two 9V supplies to a 15V output
  • Powers 15V Radial and Tonebone products
  • Discontinued; part # R800 0115 00
Prodat stejný

Fotky

8

Inzeráty

Tento model zatím nikdo neinzeruje

Až někdo bude prodávat StageBug SB-15, inzeráty a historie prodejů se objeví tady.

Prodat stejný

Popis

The SB-15 is a fully discrete, class-A buffer placed at the front of a pedalboard. It corrects the load seen by the guitar and reduces susceptibility to noise when feeding several pedals and a distant amplifier, and its drag control adjusts load correction to keep the tone natural. It is rated to drive pedal chains up to 15 meters (50 ft).

A second function is power conversion. Many power bricks provide only 9V outputs, so the SB-15 takes two 9V outputs rated at 400mA each and converts the voltage and polarity to 15V. This gives an alternative way to run Radial and Tonebone products that need a 15V supply.

In a typical setup the unit sits between the instrument and the pedals, with the pedals and amp connected downstream of it. The maker lists it as discontinued and no longer shipping; a user guide and photos remain available for owners.

Specifikace

Značka
Radial Engineering
Model
StageBug SB-15
Kategorie
Efekty a pedály

Audio

Type
Signal buffer
Circuit
100% discrete class-A
Load correction
Drag control
Maximum pedal chain length
15 meters (50ft)
Typical position
Beginning of the signal chain

Power

Power input
Two 9V outputs, 400mA each
Power output
15V
Voltage and polarity conversion
Converts 9V supplies to 15V with suitable polarity
Compatible 15V products
Radial and Tonebone 15V products

Applications

Use 1
Signal buffer driving multiple pedals and a distant amp
Use 2
Power converter for 15V Tonebone pedals from a power brick
Use 3
Front end for a pedalboard and guitar setup

Product information

Model
StageBug SB-15
Part number
R800 0115 00
Status
Discontinued, no longer shipping
Documentation
User Guide

Dokumenty

PDF Návod k použitíPDF · od výrobce

Data: radialeng.com; fotografie: Radial product page · aktualizováno 2026-10-12 · Vidíš chybu? Napiš nám