US-122MKII
Bus-powered USB 2.0 audio interface with two XLR mic preamps, balanced line inputs, a guitar input and MIDI I/O, recording at up to 96 kHz/24-bit. Aimed at home and portable recording with Mac or Windows computers. Now discontinued.
- 2 XLR mic preamps with phantom power
- Up to 96 kHz / 24-bit recording
- USB 2.0, bus powered
- Zero-latency monitoring
- MIDI in and out on 5-pin DIN
- Includes Cubase LE; replaced by US-2x2HR
Fotky
8Inzeráty
Tento model zatím nikdo neinzeruje
Až někdo bude prodávat US-122MKII, inzeráty a historie prodejů se objeví tady.
Prodat stejnýPopis
The US-122MKII is a compact two-channel USB audio interface. It has two XLR microphone inputs with phantom power for condenser mics, a pair of balanced 1/4" line inputs and a guitar-level input for recording electric guitar or bass directly. Audio is sent to the computer as a stereo signal at up to 96 kHz and 24-bit resolution.
On the monitoring side, it offers zero-latency monitoring so the performer can hear the input without the round trip through the computer. Stereo RCA line outputs feed monitors, and a front-mounted 1/4" stereo jack serves headphones. 5-pin DIN MIDI input and output connect synths and drum machines. The housing uses metal components for portable use.
The interface connects to Mac or Windows computers over USB 2.0 and takes its power from the USB bus, so no separate power supply is needed. It ships with Steinberg Cubase LE recording software. The model is discontinued and has been succeeded by the US-2x2HR.
Video
Specifikace
- Značka
- Tascam
- Model
- US-122MKII
- Kategorie
- Studio › Audio rozhraní
Audio
- Supported sampling frequency
- 44.1/48/88.2/96kHz
- Supported bit rate
- 16/24bit
- Frequency response
- 20Hz to 20kHz, +0.5/-1.0dB (44.1/48kHz, MIC IN to LINE OUT); 20Hz to 40kHz, +0.5/-1.5dB (88.2/96kHz, MIC IN to LINE OUT)
- S/N ratio (ADC to DAC)
- 98dB (INPUT knob at LINE, 20kHz LPF + A-weighted)
- S/N ratio (Monitor)
- 107dB (INPUT knob at LINE, 20kHz LPF + A-weighted)
- THD (ADC to DAC)
- 0.0045% or less (INPUT knob at LINE, 1kHz +20dBu input, 20kHz LPF)
- THD (Monitor)
- 0.002% or less (INPUT knob at LINE, 1kHz +20dBu input, 20kHz LPF)
Inputs
- Mic input connector
- XLR-3-31 (1:GND, 2:HOT, 3:COLD), balanced
- Mic input impedance
- 2.2k ohms
- Mic nominal input level (INPUT:MAX)
- -58dBu
- Mic nominal input level (INPUT:MIN)
- -14dBu
- Mic maximum input level (INPUT:MIN)
- +2dBu
- Line input connector
- 6.3mm (1/4") TRS jack (T:HOT, R:COLD, S:GND), balanced
- Input impedance (MIC/LINE)
- 15k ohms
- Input impedance (GUITAR)
- 1M ohms
- Nominal input level (MIC/LINE)
- -40dBu to +4dBu
- Nominal input level (GUITAR)
- -51dBV to -7dBV
- Maximum input level (MIC/LINE)
- +20dBu
- Maximum input level (GUITAR)
- +9dBV
Outputs
- Line output connector
- RCA pin-jack
- Line output impedance
- 200ohms
- Line nominal output level
- -10dBV
- Line maximum output level
- +6dBV
- Headphone connector
- 6.3mm (1/4") stereo phone jack
- Headphone maximum output level
- 18mW+18mW (32ohms loaded)
Connectivity
- MIDI IN
- DIN 5-pin
- MIDI OUT
- DIN 5-pin
- USB connector
- USB B type 4-pin
- USB format
- USB 2.0 HIGH SPEED/USB 1.1 FULL SPEED
Power
- Power
- USB bus powered (5V, Max 500mA)
- Power consumption
- 2.5W
Physical
- Dimensions
- 135.4(W)×47(H)×179(D)mm
- Weight
- 0.7kg
Software
- Bundle software
- Cubase LE
- Windows drivers
- WDM, ASIO, GSIF2
- Mac driver
- Core Audio
In the box
- Accessories
- CD-ROM (driver and manuals), USB cable, DVD-ROM (Cubase LE), insert sheet for Cubase LE, warranty card, owner's manual