Levitation
EarthQuaker Devices Už se neprodává

Levitation

Levitation is a reverb pedal for guitar with a vintage voicing that sits between dirty 1960s chambers, classic spring and large plate reverbs. It suits guitarists and keyboard players after anything from a short room slap to long, ringing washes. It is no longer in production.

  • Vintage-voiced reverb: chamber, spring and plate character
  • Controls: Mix, Decay, Tone, Atmosphere and a Long/short Length toggle
  • Flexi-Switch relay true bypass with latching and momentary modes
  • 9 V DC, 2.1 mm negative center, 72 mA
  • Measures 121 x 64 x 57 mm with knobs
  • No longer in production
Prodat stejný

Fotky

6

Inzeráty

Tento model zatím nikdo neinzeruje

Až někdo bude prodávat Levitation, inzeráty a historie prodejů se objeví tady.

Prodat stejný

Popis

Levitation is a guitar reverb pedal built around four knobs and one toggle switch. Its sound is described as sitting between gritty sixties chamber reverb, classic spring and big ringing plates, and it covers settings from a tight small-room slapback to very long, oscillating trails.

Mix sets the wet/dry balance, while Decay and the Length toggle together control how long the reverb lasts. Tone works as an input bandwidth control for the reverberated signal: fully clockwise removes low end for a brighter reverb, and counterclockwise lets more lows through for a fuller sound. Atmosphere feeds the upper frequencies of the trails back into the reverb to make it more harmonic and ringing.

The pedal uses Flexi-Switch relay-based true bypass, which allows both latching and momentary operation from the same footswitch. Because the switching is relay based, the pedal needs power to pass signal. It runs from a 9 V DC supply with a 2.1 mm negative-center barrel and draws 72 mA. The maker lists it as no longer in production.

Video

Specifikace

Značka
EarthQuaker Devices
Model
Levitation
Kategorie
Efekty a pedály

Controls

Mix
Wet/dry blend of the reverb
Length (toggle)
Broad-stroke decay time, shorter to left, longer to right
Decay
Length of the reverb decay
Tone
Input bandwidth control for the reverberated signal
Atmosphere
Harmonic regeneration of upper frequencies in the reverb trails

Audio

Effect type
Reverb
Input impedance
1 MΩ
Output impedance
<10 kΩ

Switching

Bypass type
Relay-based true bypass (Flexi-Switch® Technology)
Footswitch modes
Latching and momentary
Power needed to pass signal
Yes, relay-based switching

Power

Supply voltage
9 V DC
Connector
2.1 mm barrel, negative center
Current draw
72 mA

Physical

Dimensions (with knobs)
4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm)
Production status
No longer in production

Software

Operation manual
Available from the maker

Dokumenty

PDF Návod k použitíPDF · od výrobce

Data: earthquakerdevices.com; fotografie: EarthQuaker Devices product page · aktualizováno 2026-10-13 · Vidíš chybu? Napiš nám