Nano Q-Tron
Compact analog envelope-controlled filter pedal in a small enclosure, with a three-position low/band/high pass mode switch. It suits guitar, bass, keys and horns where the filter should respond to playing dynamics, from auto-wah to funk tones.
- Analog envelope-controlled filter
- Low pass, band pass and high pass modes
- Volume, Drive and Q controls
- True bypass switching
- 9V battery included; optional 9V DC centre-negative supply
- Compact enclosure, 4.5 x 2.75 x 2.1 in
Fotky
7Inzeráty
Tento model zatím nikdo neinzeruje
Až někdo bude prodávat Nano Q-Tron, inzeráty a historie prodejů se objeví tady.
Prodat stejnýPopis
The Nano Q-Tron is an analog envelope filter. The level of the incoming signal sets the cutoff or centre frequency of a swept filter, so the effect follows how hard and how softly the instrument is played. Results range from subtle movement to auto-wah and funk sounds, on guitar, bass, keys, horns and other sources.
Four controls shape the sound. Volume sets the output level, Drive sets envelope sensitivity and how far the filter sweeps (up to about 3.5 kHz), and Q sets the filter bandwidth and how pronounced the peak is. A three-position switch selects low pass, band pass or high pass. The pedal uses true bypass switching, and a status LED lights when the effect is engaged.
It has a mono input jack and an amp output jack. Power comes from an included 9V battery, or from an optional 9V DC centre-negative supply, which is not included. The pedal draws 10 mA, and the supply should not exceed 12V DC.
Video
Specifikace
- Značka
- Electro-Harmonix
- Model
- Nano Q-Tron
- Kategorie
- Efekty a pedály
Audio
- Circuit
- Analog
- Audio
- Mono
- Filter modes
- LP / BP / HP
- Maximum filter sweep frequency
- approximately 3.5kHz
Controls
- Volume knob
- Adjusts output level at the output jack
- Drive knob
- Sets envelope sensitivity gain and filter sweep width
- Q knob
- Sets filter bandwidth
- Mode switch
- Rotary, LP / BP / HP
- Footswitch
- Engages or bypasses the effect
- Status LED
- Lit when the effect is engaged
Connectivity
- Input
- Input jack
- Output
- Amp jack
- Bypass
- True Bypass
- Power jack
- 9V, center-negative
Power
- Power Supply
- 9V battery included (optional 9.6VDC-200mA power adapter not included)
- Current Draw
- 10mA
- Maximum voltage at power jack
- 12VDC
Physical
- Dimensions (in)
- 4.5 x 2.75 x 2.1
- Enclosure
- Compact, rugged
In the box
- Battery
- 9V battery