Amp Box S3
Compact stereo power amplifier with a single RCA line input and 23 W per channel into 8 ohms. Suited to small rooms, desktop nearfield monitors, streamer or multiroom setups, and in-wall or ceiling speakers.
- 2 x 23 W at 8 ohms, 40 W at 4 ohms
- One pair of RCA line inputs
- Metal casing, 103 x 36 x 118 mm, 385 g
- 12 V trigger in and out on 2.5 mm jack
- THD below 0.02% at 10 W / 4 ohms
- Designed and made in Europe
Fotky
8Inzeráty
Tento model zatím nikdo neinzeruje
Až někdo bude prodávat Amp Box S3, inzeráty a historie prodejů se objeví tady.
Prodat stejnýPopis
The Amp Box S3 is a micro-sized stereo power amplifier in a metal casing that shields against vibration and interference. It has one pair of RCA inputs and drives passive loudspeakers, delivering 2 x 23 W into 8 ohms and 40 W into 4 ohms, with a 2 x 50 W peak figure at 4 ohms. It is built around a redesigned PCB and amplifier topology aimed at lower distortion and a better signal-to-noise ratio.
Suggested uses include a hi-fi amplifier for rooms of 10-15 m2, a desktop amp for nearfield monitors, a power-amp upgrade for a streamer or home cinema system, a multiroom amplifier, and an amp for in-wall or ceiling speakers. The case measures 103 x 36 x 118 mm and weighs 385 g without the power supply.
Speaker connections accept 4 mm banana plugs, spades, pins or bare wire. A 2.5 mm jack provides a 12 V DC trigger input and output for switching with other equipment. Power comes from an external 20 V / 3 A universal DC supply. The amp is designed and produced in Europe and comes in a black and silver finish.
Video
Specifikace
- Značka
- Pro-Ject
- Model
- Amp Box S3
- Kategorie
- Hi-Fi a domácí audio › Zesilovače
Audio
- Power output
- 2 x 23 W / 40 W at 8 ohms / 4 ohms
- Peak power
- 2 x 50 W at 4 ohms
- Frequency response
- 20Hz - 20kHz (- 0,7dB / 4 ohms)
- Channel separation
- > -68 dB @ 20kHz
- Signal-to-noise ratio
- 87dBV (100dBV-'A' weighted)/4ohms
- THD
- < 0,02% @ 10W / 4 ohms
- Gain
- 31 dB
Inputs
- Input
- 1 pair RCA sockets
- Input impedance
- 25 kohm
Outputs
- Speaker sockets
- 4mm Ø Banana, spades. pins or bare wire
Connectivity
- Trigger 12V DC
- In&Out, 2-pole jack socket Ø 2,5mm
Power
- Power supply
- 20V/3A DC (universal power supply)
Physical
- Dimensions W x H x D
- 103 x 36 x 118mm
- Weight
- 385g without power supply
- Finish
- Black & silver
- Casing
- Metal