DIG V2

DIG V2 combines two integrated delay machines in one pedal. Delay 1 acts as the master, with a time range of 20 ms to 1.6 s set by a knob or tap tempo. Delay 2 follows it through five rhythmic subdivisions (triplet, eighth, dotted eighth, dotted quarter and golden ratio), or runs independently in Free Mode over the same 20 ms to 1.6 s range. Three voicings model early 80s adaptive delta modulation, mid 80s 12 bit PCM and a modern 24 bit/96 kHz delay.

The two delays can be routed in series, parallel or ping pong. Other controls include separate Mix knobs, a shared Repeats knob with an optional separate Delay 2 repeats setting, three modulation levels (off, light, deep) and a Tone knob that works as a high cut to the left and a low cut to the right. Holding the TAP footswitch starts circular repeats, which hold the repeats at a steady level until the switch is released.

The input is a JFET preamp with a mono/stereo switch and a line/instrument level option that adds 10 dB of headroom. Bypass can be relay-switched true bypass (the default) or buffered. The EXP/MIDI jack and USB-C port give full MIDI control, MIDI Clock Sync and 300 preset locations. USB-C also handles firmware updates. The pedal needs a 9 V DC supply, which is not included.