Olivera
Strymon Už se neprodává

Olivera

Olivera is a stereo digital pedal that emulates a vintage oil can echo, the electromechanical delay with a rotating charged disk. It suits guitarists and keyboardists who want dark, modulated, reverberant repeats with MIDI and stereo options.

  • Oil can echo emulation with a new algorithm
  • Short, Long or Both playback heads
  • Delay time 200ms–800ms disc rotation
  • Discrete stereo operation, TRS in and out
  • 300 presets and full MIDI via EXP/MIDI or USB
  • True or buffered bypass, delay spillover
Prodat stejný

Fotky

6

Inzeráty

Tento model zatím nikdo neinzeruje

Až někdo bude prodávat Olivera, inzeráty a historie prodejů se objeví tady.

Prodat stejný

Popis

Olivera models the behaviour of oil can echo units, which store a static charge on a rotating disk in an oil-filled can. It reproduces the murky, band-limited repeats, the residual repeats that remain even with no regeneration, and the uneven cadence caused by the disk's rotation. Delay time is set by a virtual rotation speed and the Heads switch selects the short, long or both playback heads.

Controls are Time, Mix, Rate, Regen and Intensity, plus a three-way Heads switch. Further functions include delay spillover, a Class A JFET stereo input preamp, selectable true or buffered bypass, 300 presets and full MIDI implementation. A Strymon MiniSwitch can hold infinite repeats, and a MultiSwitch Plus gives preset and custom-mode control.

The pedal has TRS stereo input and output jacks, with a rear switch for mono, mono-to-stereo or stereo operation. An EXP/MIDI jack accepts an expression pedal, MiniSwitch, MultiSwitch Plus or TRS MIDI, and a USB port handles MIDI from a computer and firmware updates. It runs from a 9V DC supply, which is not included.

Video

Specifikace

Značka
Strymon
Model
Olivera
Kategorie
Efekty a pedály

Inputs

Audio input
High impedance, ultra low-noise, discrete Class A JFET TRS stereo input
Audio input impedance
1M Ohm
Expression/MIDI input
TRS expression pedal, MiniSwitch, MultiSwitch Plus or TRS MIDI connection

Outputs

Audio output
Low impedance TRS stereo output
Audio output impedance
100 Ohm
I/O modes
Mono In/Mono Out, Mono In/Stereo Out, Stereo In/Stereo Out

Connectivity

MIDI
Full MIDI implementation via EXP/MIDI jack or USB
USB
MIDI control from a computer and firmware updates
Presets
300

Audio

Converters
24-bit 96kHz A/D and D/A
Processor
520MHz ARM Superscalar
Processing
32-bit floating point
Frequency response
20Hz to 20kHz
Signal to noise ratio
116dB (typical)
Delay time, Short head
72ms – 290ms
Delay time, Long head
155ms – 620ms
Disc rotation
200ms – 800ms (residual static repeats)
Bypass
Relay-switched true bypass (default) or buffered bypass

Power

Power requirement
9V DC, center-negative, 2.1mm, 250mA minimum
Power supply
Not included

Physical

Chassis
Anodized aluminum
Dimensions
4.6" deep x 2.7" wide x 2.2" tall (11.7 cm x 6.9 cm x 5.6 cm)
Made in
Designed and built in the USA

Dokumenty

PDF Návod k použitíPDF · od výrobce

Data: strymon.net; fotografie: Strymon product page · aktualizováno 2026-10-14 · Vidíš chybu? Napiš nám